EZ-4DI-2AI-2DO is a I/O module with 4 digital inputs, 2 analog inputs, 2 relay outputs, slave for Modbus RTU, on two RS485 serial ports. The module allows the possibility to set the parameters via USB (Easy setup software) an registers repetition on Modbus RTU protocol (NR.2 independent RS485 slave ports). Baud rate for ModbusRTU is from 1.200 up to 115.200 bps. Signal configuration include 2 analog inputs (voltage or current), 4 digital inputs (NPN or PNP), 3 relay outputs, 4 counters and 4 totalizers @ 32 bits, max 7 kHz. EZ-4DI-2AI-2DO has 1.500 Vac galvanic isolation between power supply and communication.

Order code :		EZ-4DI-2AI-2DO
Description:		4 CH Digital Input/ 2 CH Analogue Input, 2 CH Digital Output, Modbus RTU
Power Supply:		19.. 28 Vac (50..60 Hz), 11.. 40Vdc
Isolation:		1.500 Vac
Digital Input:		4-CH PNP, NPN, max freq. 7 kHz
Digital Output:		2-CH SPDT relay
Analog Input:		2-CH mA/ Vdc, 16 bit
Interfaces:		Nr 2 RS485 port, Nr 1 mini USB 2.0 port
Protocol:		ModBUS RTU
Operating Temperatura:		-20 °C.. +70 °C
Dimension:		100 x 35 x 111 mm

EZE-2AI is a I/O module with 2 analog inputs, slave for Modbus TCP-IP communication (Ethernet) and Modbus RTU. The module insures server mode for the Ethernet communication port with ModbusTCP-IP protocol: Ethernet port (10-100 Mbps), 4 client, Embedded Webserver. ZE-2AI allows the possibility to set the parameters via internet (Web-server) or USB (Easy setup software) and also Modbus registers repetition on TCP-IP protocol (1 Ethernet port) and Modbus RTU (2 independent RS485 slave serial ports). Baud rate for ModbusRTU starts from 1.200 up to 115.200 baud. Analog inputs can be setted in voltage or current scales.

Order code :		EZE-2AI
Description:		2 CH Analogue input Modbus RTU - Modbus TCP-IP module
Power Supply:		19.. 28 Vac (50..60 Hz), 11.. 40Vdc
Isolation:		1.500 Vac
Analog Input:		2-CH 0-20 mA / 0-30 V; 16 bit ADC resolution
Accuracy:		0,1%
Interfaces:		N°1 Ethernet 10/100 Mbps port, N°2 RS485 ports, N°1 mini USB 2.0 port
Protocols:		ModBUS RTU, ModBUS TCP-IP, http
Settings:		Software (EASY SETUP), DIP switch (address, baud rate), web server (remote I/O configuration)
Operating Temperature:		-10 °C.. +65 °C
Dimension:		17.5 x 100 x 112 mm

EZE-4DI-2AI-2DO is a I/O module with 4 digital inputs, 2 analog inputs, 2 relay outputs, slave for Modbus TCP-IP communication (Ethernet) and Modbus RTU, on two RS485 serial ports. The module supports server mode for the Ethernet communication port with ModbusTCP-IP protocol: Ethernet port (10-100 Mbps), 4 client, Embedded Webserver. EZE-4DI-2AI-2DO allows the possibility to set the parameters via internet (Web-server) or USB (Easy setup software) and the Modbus registers repetition on TCP-IP protocol (NR.1 Ethernet port) and RTU (NR.2 independent slave RS485 ports).

Order code :		EZE-4DI-2AI-2DO
Description:		4 CH Digital Input/ 2 CH Analogue Input, 2 CH Digital Output Modbus RTU-Modbus TCP-IP
Power Supply:		19.. 28 Vac (50..60 Hz), 11.. 40Vdc
Isolation:		1.500 Vac
Digital Input:		4-CH PNP, NPN, max freq. 7 kHz
Digital Output:		2-CH SPDT relay max 5 A
Analog Input:		2-CH 0-20 mA / 0-30 V, 16 bit ADC resolution
Totalizers:		4 @ 32 bit max 10 kHz
Counters:		4 @ 32 bit max 7 kHz
Interfaces:		Nr 10/100 Mbps Ethernet port, Nr 2 RS485 ports, Nr 1 mini USB 2.0 port
Protocols:		ModBUS RTU, ModBUS TCP-IP, http
Configuration:		Software (EASY SETUP), DIP switch (address, baud rate), web server (I/O)
Operating Temperature:		-20 °C.. +70 °C
Dimension:		100 x 35 x 111 mm