产品中心/Product Center

品牌

*注：按产品型号，可检索常见问答、样本、证书等信息。

首页 >>产品中心 >>产品类型 >>仪器仪表 >>虚拟仪器 >>产品目录 >>示波器 >>Handyprobe HP3

Handyprobe HP3 订购编号:

点击这里发送询价

请详细填写一下内容，包括产品原产国、品牌完整名称以及您所能得到的所有信息，这将有助于我们准确迅速的报价。非常感谢！

品牌厂商（Manutacturer）*

公司名称*

产品名称（Product Name）*

联系人*

产品型号（Product Type）*

联系地址*

产品序列号（ID-Nr；Artikel-Nr）

联系电话*

产品描述（Voltage，Amp，Kw,Rpm）

传真*

需求数量（Quantity demanded）

联系邮箱*

附加信息，更具体要求

产品介绍
相关产品及附件
应用范围
标准及认证证书
技术资料

Handyprobe HP3, a new standard in portable measuring The world's first PC based 100 MS/s differential USB high voltage oscilloscope.

The Handyprobe HP3 combines a fast sampling up to 100 MS/s with a high voltage input range of 800 V and a differential input in a small and light enclosure. Powered only by USB, this versatile high voltage USB scope enables safely measuring high voltages anywhere in the field.

Handyprobe HP3 key specifications

The Handyprobe HP3 high voltage oscilloscope is a small and light weight measurement probe. Its rugged housing is specially designed for use in a dirty and rough environment but is compact enough to fit into any tool case.

The Handyprobe HP3 high voltage oscilloscope key specifications are:

Oscilloscope / Spectrum analyzer / Multimeter / Data logger
High voltage input range of 200 mV up to 800 V
Differential input
100 MS/s sampling
50 MHz bandwidth
10 MS/s, 10 bit continuous streaming
1 MSamples memory
0.2 % DC vertical accuracy, 0.3 % typical
100 ppm time base accuracy

Models

The Handyprobe HP3 high voltage oscilloscope is available in 3 models that distinguish in maximum sampling rate and maximum streaming rate:

Order code	Max. sampling speed	Max. streaming speed
HP3-100	100 MS/s	10 MS/s
HP3-20	20 MS/s	2 MS/s
HP3-5	5 MS/s	500 kS/s

Package contents

The Handyprobe HP3 high voltage oscilloscope comes in a package containing the following items:

Amount	Item
1	Carry case BB271
1	Handyprobe HP3
1	Measure lead TP-C812A
1	Alligator Clip TP-AC80I Set
1	Test Probe TP-TP90 Set
1	Wrist strap
1	CD-ROM with Multi Channel oscilloscope software and drivers
1	Quick Start Guide
1	Instrument manual
1	Software manual

Handyprobe HP3 features

Many instruments in one device

The Handyprobe HP3 high voltage oscilloscope is a professional computer controlled USB measuring instrument with a high voltage differential input with a maximum input range of ±800 V DC (566 V RMS). It is delivered with Multi Channel oscilloscope software, the world's most versatile measuring software. It turns the Handyprobe HP3 high voltage oscilloscope into a USB Multimeter, a USB Oscilloscope, a USB Spectrum analyzer, a USB Data logger/Transient recorder and a Protocol analyzer. This powerful and compact measuring instrument can solve almost every measurement problem.

Oscilloscope
Multimeter
Spectrum analyzer
Data logger

Differential input

The Handyprobe HP3 is equipped with a high voltage differential input with a maximum input range of 800 V DC (566 V RMS). Because of the differential input, it is not possible to create a short circuit to ground through the usb oscilloscope. The high voltage input range makes it possible to use the Handyprobe HP3 without additional attenuators. See the classroom section for information about differential measuring.

Fast streaming

The advanced driver technology makes it possible to measure a continuous stream of data from the Handyprobe HP3 high voltage oscilloscope to the computer, at a maximum rate of 10 MSamples/s. The maximum measuring time is only limited by the available space on the hard drive. The high sampling rate makes it possible to capture short events with high accuracy. It is also possible to monitor e.g. the line power with the Handyprobe HP3 high voltage oscilloscope for a very long time and afterwards view and analyze each cycle of the signal thoroughly.

Sophisticated software

The Handyprobe HP3 high voltage oscilloscope is delivered with Multi Channel oscilloscope software, the world's most versatile measuring software. It turns the Handyprobe HP3 high voltage oscilloscope into an oscilloscope, a spectrum analyzer, a data logger, a multimeter and a protocol analyzer. The many mathematical operations make it possible to extract any information from the measured signals.

Low noise measuring lead

Measure lead TP-C812A: low noise differential banana to banana measuring lead, 2 m The input of the Handyprobe HP3 high voltage oscilloscope is differential, which means that both sides of the input have a high impedance. There is no connection to ground as in conventional oscilloscopes which are used with coax cables and standard oscilloscope probes.

The special low noise Measure lead TP-C812A is developed for the Handyprobe HP3 high voltage oscilloscope. It is very insensitive to external interfering signals. The two ends can be placed up to two meters apart, while picking up very little interference. With a conventional oscilloscope with standard oscilloscope probes this is not possible. The maximum distance between the positive side and ground of a standard oscilloscope probe is usually limited to approximately 20 cm. The Measure lead TP-C812A for the Handyprobe HP3 high voltage oscilloscope does not have this limitation. Measuring between two distant points is now no problem anymore. The Measure lead TP-C812A uses a heat resistant silicone isolation and shrouded banana plugs.

Ergonomic design

The Handyprobe HP3 high voltage oscilloscope is designed to fit nicely in your hand. Its housing is fitted with soft rubber areas that ensure a good grip on it. A wrist strap can be attached, to carry the Handyprobe HP3 high voltage oscilloscope or to hang it near the test setup.

Handyprobe HP3 specifications

The tables below show detailed specifications of the Handyprobe HP3 high voltage oscilloscope. Jump to acquisition specifications, trigger specifications or general specifications.

Acquisition system
Input channel	1
CH1	isolated 4 mm banana jack sockets
Type	differential
Resolution	10 bits
Amplitude accuracy	0.3 % of full scale
Ranges	±0.2 V to ±800 V full scale in a 2 - 4 - 8 sequence
Coupling	AC/DC
Impedance	2.1 MOhm // 15 pF
Maximum input voltage (in all ranges)	600 V_RMS CAT II; derated at 3 dB/decade above 20 kHz to 25 V_pk-pk at 50 MHz
Maximum Common Mode voltage	200 mV to 8 V range: 12 V 20 V to 80 V range: 120 V 200 V to 800 V range: 800 V
Common Mode Rejection Ratio	60 dB
Bandwidth (-3dB)	50 MHz
AC coupling cut off frequency (-3dB)	1.5 Hz
Rise time	10 ns
Overshoot	1 %
Maximum sampling rate	Depending on model
Model HP3-100	100 MS/s real time
Model HP3-20	20 MS/s real time
Model HP3-5	5 MS/s real time
Maximum streaming rate	Depending on model
Model HP3-100	10 MS/s
Model HP3-20	2 MS/s
Model HP3-5	500 kS/s
Sampling clock source	internal, quartz
Accuracy	±0.01 %
Stability	±100 ppm over -40 °C to +85 °C
Time base aging	±5 ppm/year
Memory	1048576 samples
Trigger
System	digital, 2 levels
Source	CH1
Trigger modes	rising edge, falling edge
Level adjustment	0 to 100 % of full scale
Hysteresis adjustment	0 to 100 % of full scale
Resolution	0.1 % (10 bits)
Pre trigger	0 to 1048576 samples (0 to 100%, 1 sample resolution)
Post trigger	0 to 1048576 samples (0 to 100%, 1 sample resolution)
Trigger hold-off	0 to 4194303 samples, 1 sample resolution

Interface
Interface	USB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/s) and USB 3.0 compatible)

Power Requirements
Power from USB port	400 mA max (2 W max)

Physical
Instrument height	25 mm (1 inch)
Instrument length	177 mm (6.9 inch)
Instrument width	68 mm (2.7 inch)
USB cable length	1.8 m (70 inch)
Weight	290 g (10.2 ounce)

I/O connectors
Channel 1	isolated 4 mm banana jack sockets
USB	fixed cable with USB 2.0 type A connector

System Requirements
PC I/O connection	USB
Operating System	Windows 98/ME/2000/XP/Vista/7/8/10

Operating Environment
Ambient temperature	0 to 55 °C
Relative humidity	10 to 90 % non condensing

Storage Environment
Ambient temperature	-20 to 70 °C
Relative humidity	5 to 95 % non condensing

Certifications and Compliances
CE mark compliance	Yes
RoHS	Yes

Package
Convenient carrying case
Instrument	Handyprobe HP3
Test lead	Measure lead TP-C812A
Accessories	Test Probe TP-TP90 Set Alligator Clip TP-AC80I Set wrist strap
Software	Windows 98/2000/ME/XP/Vista/7/8/10 on CD
Drivers	Windows 98/2000/ME/XP/Vista/7/8/10 on CD
Manual	instrument manual and software user manuals color printed on paper and digital on CD

Handyprobe HP3 accessories

Several accessories are available for use with the Handyprobe HP3 high voltage oscilloscope. The most common related products, such as test probes and current clamps are listed here. Refer to the products page to find all TiePie products.