EZC-3AO is used to get N.3 analogue outputs (mA or V) from a CANopen system. The standard can be either mA (0..20mA / 4..20mA) or V (-10..10 V, 0..10 V or 2..10 V). A 3-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas
product information

Order code :		EZC-3AO
Description:		3 CH analog output (mA, V) CANopen module
Power Supply:		10..40 Vdc, 19..28 Vac
Max consumption:		2,5 W
Isolation:		1,5 kVac (5 way)
Accuracy:		0,05%
Resolution:		14 bit
Channels:		3
Voltage range:		±10 V
Current range:		0..20, 4..20 mA
RPDO (0-100% output):		< 20 ms
Operating temperature:		-10..+65°C
Dimension:		35 x 100 x 112 mm

EZC-4RTD is an interface for RTD sensors (PT100, PT1000, PT500, Ni100) with 2,3 or 4 wires. The number of input is 4 and the each input is independent from each other. It’s a CANopen device and can be connected into a CANopen network. A 6-way galvanic isolation among Power supply // inputs // RS485 circuits assures the integrity of your datas (each input channel is isolated from the other circuits).
product information

Order code :		EZC-4RTD
Description:		4 Ch RTD (P100, Ni100, Pt500, Pt1000) input CANopen module
Power Supply:		10..40 Vdc, 19..28 Vac
Max power consumption:		1 W
Isolation:		1,5 kVac (6-way)
Accuracy:		0,05%
Resolution:		14 bit
Channels:		4
Pt100 range:		-200..+650°C
Pt500 range:		-200..+750°C
Pt1000 range:		-200..+210°C
Ni100 range:		-60..+250°C
Analog conversion response time:		< 20 ms
Operating temperature:		-10..+65°C
Dimension:		35 x 100 x 112 mm

EZC-8AI is used to interface analog inputs (Voltage or current, also with bipolar range) with CANopen system. The modules is able to supply all 8 current loops at the same time, this is very useful for 2-wire sensors because the wiring does not need an external power supply. A 6-way galvanic isolation among Power supply // input (couples) // RS485 circuits assures the integrity of your datas.
product information

Order code :		EZC-8AI
Description:		8 CH analog input (mA, V) CANopen module
Power Supply:		10..40 Vdc, 19..28 Vac
Max consumption:		5 W
Isolation:		1,5 kVac (6 ways)
Analog conversion response time:		20 ms (4 channels); 40 ms (8 channels)
Accuracy:		0,05%
Resolution:		15 bit
Power transducers:		Up to 8 sensors (max 22 mA)
Channels:		8
Voltage range:		±10 V
Current range:		0..20, 4..20 mA
Operating temperature:		-10..+65°C
Dimension:		35 x 100 x 112 mm

EZC-8TC is an interface for Thermocouple sensors (J, K, E, N, S, R, B ,T) and generic sensor with mV as standard output signal. The number of input is 8 and each input is independent from each other. It’s a CANopen deviced and can be connected into a CANopen network. A 6-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas (each couple of channels is isolated from the other circuits).
product information

Order code :		EZC-8TC
Description:		8 CH Thermocouple (J,K,E,N,S,R,B,T) CANopen module
Power Supply:		10..40 Vdc, 19..28 Vac
Max consumption:		1 W
Isolation:		1,5 kVac (6 vie)
Accuracy:		0,1%
Resolution:		15 bit
Channels:		8
Thermocouple type:		J,KE,N,S,R,B,T (EN 60584-1)
Span:		-10,1..81,4 mV
Impedance:		10 MΩ
Analog conversion response time:		< 40 ms
Operating temperature:		-10..+65°C
Dimension:		35 x 100 x 112 mm

EZC-SG is a strain gauge signal converter. Measurements taken using the 6-wires or 4-wires technique are available through CANopen protocol. Sensitivity from 1 to 64mV/V, settable by DIP switch for integer values, via software for real/integer values. Stable weight indication via CANopen/digital output. Remote writing of the tare in volatile and/or non-volatile memory by digital input/CANopen.
product information

Order code :		EZC-SG
Description:		1 CH strain gauge CANopen module
Power Supply:		10..40 Vdc, 19..28 Vac
Max consumption:		1 W
Isolation:		1,5 kVac (3-way)
Accuracy:		0,01%
Resolution:		24 bit
Load cell analog input:		Voltage supply 5 Vdc, min impedance 87 Ω (350 Ω, 4 load cells), 4 or 6 wire connection, sensitivity 1..64 mV
Digital input:		Tare calibration / span
Digital output:		Stable weight / limit switch
Response time:		7 ms
Operating temperature:		-10..+65°C
Dimension:		35 x 100 x 112 mm