产品中心/Product Center

品牌

*注：按产品型号，可检索常见问答、样本、证书等信息。

首页 >>产品中心 >>产品类型 >>仪器仪表 >>虚拟仪器 >>产品目录 >>仪器配件 >>TP-C1812B

Measure lead TP-C1812B 订购编号:

点击这里发送询价

请详细填写一下内容，包括产品原产国、品牌完整名称以及您所能得到的所有信息，这将有助于我们准确迅速的报价。非常感谢！

品牌厂商（Manutacturer）*

公司名称*

产品名称（Product Name）*

联系人*

产品型号（Product Type）*

联系地址*

产品序列号（ID-Nr；Artikel-Nr）

联系电话*

产品描述（Voltage，Amp，Kw,Rpm）

传真*

需求数量（Quantity demanded）

联系邮箱*

附加信息，更具体要求

产品介绍
相关产品及附件
应用范围
标准及认证证书
技术资料

Measure lead TP-C1812B A low noise measure lead for use with differential USB oscilloscopes.

The Measure lead TP-C1812B is a low noise differential measure lead designed to be used with the Handyscope HS4 DIFF and the Automotive scope ATS5004D. This 3 meter long measure lead splits in two individual ends of each 1.2 meter long. The BNC connector at one end plugs directly on the instrument. The two other ends each feature a single 4 mm banana jack, on which application specific test points, clamps or probes can be plugged.

The Measure lead TP-C1812B is very flexible, uses a heat and oil resistant silicone isolation and shrouded banana jacks.

Measure lead TP-C1812B key specifications

Measure lead TP-C1812B
3 m in length
isolated female BNC connector
4 MHz bandwidth
CAT III, 1000 V, double isolated

Models

The following models of the Measure lead TP-C1812B are available:

Order code
TP-C1812B

Package contents

The Measure lead TP-C1812B is delivered with:

Amount	Item
1	Measure lead TP-C1812B
3	Red color coding rings
3	Blue color coding rings
3	Yellow color coding rings
3	Green color coding rings
3	Pink color coding rings

Measure lead TP-C1812B description

The input of the Handyscope HS4 DIFF or Automotive scope ATS5004D is differential, which means that both sides of the input have a high impedance. There is no connection to ground as in conventional oscilloscopes which are used with coax cables. Using a coax cable on the Handyscope HS4 DIFF or Automotive scope ATS5004D would result in the Handyscope HS4 DIFF or Automotive scope ATS5004D picking up a lot of external interference.

High CCMR

The specially designed Measure lead TP-C1812B has a high Common Mode Rejection Ratio (CMRR), it is very insensitive to external interfering signals. The two ends can be placed up to more than two meters apart, while picking up very little interference. With a conventional oscilloscope with a standard oscilloscope probe this is not possible. The maximum distance between the positive side and ground is then usually limited to approximately 20 cm. And this 20 cm is very susceptible to interference. The Measure lead TP-C1812B for the Handyscope HS4 DIFF and Automotive scope ATS5004D does not have this disadvantage. External interference is very well suppressed by the special construction of the Measure lead TP-C1812B. Measuring between two distant points is now possible.

Measure lead TP-C1812B specifications

The table below shows the detailed specifications of the Measure lead TP-C1812B.

Measure lead TP-C1812B
Connectors
Instrument side	isolated female BNC connector
Test point side	red and black 4 mm shrouded banana jacks
Bandwidth	4 MHz
Safety	CAT III, 1000 V, double isolated
Dimensions
Total length	3000 mm
Length to split	1800 mm
Length individual ends	1200 mm
Weight	100 g
Color	black
Certifications and compliances
CE conformity	yes
RoHS	yes
Accessories
Color coding rings	5 x 3 rings, various colors