品牌
*注：按产品型号，可检索常见问答、样本、证书等信息。
Motor picture
Technical description
Motorhousing deepdrawn & corrosion protected
Excitation field permanent magnet
Type of gear mesh worm gear
Gear housing zinc die cast
Gear wheel material plastic
Lubrication grease
Mechanical interface steel shaft
Electric interface connector
Sensor optional
Thermal protection optional
EMC suppression optional
Applications
Industrial:
Home Automation, Machine Construction
Automotive:
Trunk & tailgate opening & closing
Design Data
| Commutation | Brushed | |
| Direction of rotation | Bi-directional | |
| Bearing type | A:Ball - B:Sleeve |
Performance data
| Rated voltage [V] | UN | 24 |
| Nominal torque [Nm] | MN | 5 |
| Nominal speed [min-1] | nN | 56.833 |
| Nominal power [W] | PN | 29.758 |
| Nominal current [A] | IN | 5.5 |
| Nominal force [kN] | FN | 0 |
Sensor data
| Pulses | 63 | |
| Output channels | 2 |
Other data
| Gear ratio | 63/1 | |
| Gear wheel material | plastic | |
| Suppression components | 3,5μH | |
| Enclosure class | IP 30 | |
| Weight | 1.25 |
Remarks
d = for thread-forming screw M6 DIN ISO 965-2
Connector layouts
Description
Flat plug (DIN 46244) 6,3x0,8 mating with receptacle housing part#180907, drwg# C-180907& Receptacles for tabs, conductor cross section 0,5-1,5 sqmm (20-18AWG) part# 925603-x, drwg# 925603 www.tycoelectronics.com
I Hall-IC A1, terminal 3
II Hall-IC A2, terminal 4
III Hall-IC +, terminal 5
IV Hall-IC -, terminal 6
V Mating connector: Panduit CE100 F22 - 04
I Ground connection
Blade terminal 6.3 x 0.8 DIN 46 244
Characteristic curves
Drawing
Shafts
Description
I serration (rolled): no of teeth 28, pitch circle dia 9 mm, tip circle dia 9.6 mm, root circle dia 8.26 mm space width angle 60°- go/no go gauge Frenco 33906
Wiring diagrams
I Hall-IC A1, terminal 3
II Hall-IC A2, terminal 4
III Hall-IC +, terminal 5
IV Hall-IC -, terminal 6
工程咨询
数据中心
采油平台
发电厂
核电厂
输配电
政府及军事设施
冶金矿业
制造业
可再生能源
铁路运输系统
